APPA 138F 1000A AC/DC COLLAR METER

10,000 counts digital display Flexible clamp measurement range (can be used with optional flexible clamps) Active display light, wide-scale display Analog bar graph True RMS measurement in AC and AC/DC mode Flashlight illumination when between clamps Auto AC/DC 1000 Amp feature and selection Auto AC /DC 1000 Volt feature and selection Auto Ohm/Continuity/Diode selection Power and power factor measurement Total harmonic distortion and 1 to 25 harmonics Phase sequence indication 100K Ohm resistance feature Non-contact voltage detector Frequency counter Capacitance feature °C/°F Temperature function Intelligent data hold Peak hold Inrush current DCA Auto-reset key Min/Max hold Low pass filter Auto off 42mm. conductors up to clamp diameter (1000MCM) Busbar size 62mmx12mm 120 cm drop test Including temperature probe Luxury carrying case Suitable battery cover CAT. IV 600V / CAT. III 1000V Safety standard APPA 137 APPA 138F ACA: Steps 100.00A, 1000.0A 100.00A, 1000.0A Resolution 0.01A 0.01A Basic Accuracy: ±(1.5%+5d) at 50Hz~500Hz ±(1.5%+5d) at 50Hz~ 500Hz Conversion Type AC+DC True-RMS AC+DC True-RMS DCA: Steps NA 100.00A, 1000.0A Resolution 0.01A Basic Accuracy ±(1.5%+5d) AC+DC A: Steps NA 100.00A, 1000.0A Resolution 0.01 A Base Accuracy As in ACA+±(1.5%+5d) ACV: Steps 100.00V ~ 1000V 100.00V ~ 1000V Resolution 0.01V 0.01V Base Accuracy: ±(1.5%+5d) at 50Hz~500Hz ±(1.5%+5d) ) at 50Hz~500Hz Input impedance: 3.5 MΩ 3.5 MΩ Overload protection: 1000V rms 1000V rms Conversion type AC+DC True-RMS AC+DC True-RMS DCV: Ranges 100.00V ~ 1000V 100.00V ~ 1000V Resolution 0.01V 0.01V Basic Accuracy: ±(0.7%+2d) ±(0.7%+2d) Input impedance: 3.5 MΩ 3.5 MΩ Overload protection: 1000V rms 1000V rms AC+DC V: Ranges 100.00V ~ 1000V 100.00V ~ 1000V Resolution 0.01V 0.01 V Basic Accuracy: As in ACV+(1.0%+5d) As in ACV+(1.0%+5d) Input impedance: 3.5 MΩ 3.5 MΩ Overload protection: 1000V rms 1000V rms Wattage: Ranges 10kW~1MW 10KW~1MW Resolution 1W 1W Basic Accuracy P.F.: Ranges -1.00~1.00 -1.00~1.00 Resolution 0.01 0.01 Basis Accuracy ±3° ±3° T.H.D.: Ranges 0.1%~100.0% 0.1%~100.0% Resolution 0.1% 0.1% Fundamental Accuracy Harmonics: Ranges 0.1%~100.0% 0.1%~100.0% Resolution 0.1% 0.1% Basis Accuracy ±(5.0%+10d) for order 1-12 ±(10.0%+10d) for order 13-25 ±(5.0%+10d) for order 1-12 ±(10.0%+10d) for order 13-25 OHM : Ranges 1.0000KΩ, 10.00KΩ, 100.00KΩ 1.0000KΩ, 10.00KΩ, 100.00KΩ Resolution 0.01Ω 0.01Ω Basic Accuracy: ±(1.0%+3d) ±(1.0%+3d) Overload protection: 1000V rms 1000V rms Continuity warning sound: . <30Ω, 2KHz buzzer <30Ω, 2KHz buzzer Diode Test: Open circuit voltage: ±1.8V max. ±1.8V max. Capacitance: Steps 400.0μF, 4,000mF 400.0μF, 4,000mF Resolution 0.1μF 0.1μF Basic Accuracy Overload protection: 1000V rms 1000V rms Frequency counter: Steps 20.0Hz~10KHz 20.0Hz~10KHz Resolution 0.1Hz 0.1Hz Basic Accuracy Temperature: Steps -50°C~1000°C Resolution 0.1°C Basic Accuracy ±(1%+1°C) Overload 1000V rms Sampling rate 3 times/sec 3 times/s Overload indication “OL” or “-OL” “OL” ” or “-OL” Auto power off: Approx. 15 min. About 15 min. Operating temperature: 0°C~50°C, ≤80%RH 0°C~50°C, ≤80%RH Storage temperature: -20°C~60°C -20°C~60°C Temperature coefficient: 0.2 (Spec. Acc) / °C, <18°C or >28°C 0.2 (Spec. Acc) / °C, <18°C or >28°C Safety: IEC 61010 and designed to meet UL61010 specifications CAT . IV 600VCAT.III 1000V CAT.IV 600VCAT.III 1000V Maximum jaw opening 45mm. 45mm. Maximum busbar size 62x12mm. Power requirement: Single 9V battery (NEDA 1604A or IEC 6LF22) 100 100 Battery life: In hours (Alkaline battery) Size: 87.3mm (W)x238.8mm(L)x51mm(H) 87.3mm (W)x260mm(L) x51mm(H) Weight: 420 in grams 420 With instrument: Test leads, ZnC battery (inserted), manual and carrying case · (Also includes temperature probe)