SEVİNDİK COLUMN DRILL - 32MM

Sevindik Column Drill - 32mm Product Features Operation commissioning The bench must first be fixed to the floor from the base plate where it will be operated. The machine becomes ready for operation by connecting the energy cable input end to a three-phase switch. Working is started by attaching 4 morses on one side (the part that goes to the drill) to the Morse spindle and the other side with a suitable morse on the chuck. Drilling cycles There is a 4-speed belt pulley system on the bench. By loosening the belt from the tensioning device, the appropriate speed is adjusted over the pulley and the belt is tensioned again. FRONT REAR Maintenance and protection The working parts of the machine should be lubricated frequently. Column Lifting Box Sleeve Shaft Metric Lowering The four-arm must be grounded from the foot with the grounding busbar. Technical Specifications Drilling Capacitymm32 Morse Barrel4 Column Diameterm130 Engine Power1 Hp Engine Revolution/min1400 Stroke Capacitymm135 Lengthmm1920 Weightkg430