TÜRKİYE / İZMİR / KONAK
Molykote® is Dow Corning's brand of specialty lubricants. Whatever your field and application in industry - food and beverage, chemistry, industrial assembly and maintenance - you can find solutions with Molykote® specialty lubricant products. With special additives and special oils in its formulations; It can solve problems related to lubrication even in the most difficult applications, reduce wear to minimal levels by reducing friction, and accordingly increase material life to maximum degrees, meet all kinds of difficult conditions - high pressure, aggressive chemical conditions, high and low temperature, low and high speed requirements, It is designed and manufactured to save energy. Anti-Seize Paste Products
A high percentage of different lubricating additives in the base oil help prevent seizures at high loads. Dow Corning's Molykote® branded anti-seize assembly paste products; It is used in all industrial equipment operating under high loads or high temperatures, to protect it from possible damages such as burning and rusting.
General features
Highly abrasion resistant and permanent protection
Reliable performance over wide temperature ranges
Permanent and constant coefficient of friction (CoF)
Water resistance, chemical resistance
Protection against corrosion
Molykote Paste product groups are often used for the purpose of providing easy and constant torque tightening of all kinds of tight fitting and bolt and nut connections, and easy disassembly without damage and loss during maintenance. It is used in the lubrication of the roller and plain bearings of the presses, in the lubrication of the lathe chucks, for reducing friction and wear during the commissioning of the open and closed gear groups, and for lapping (in the running-in cycle). It is also suitable for the lubrication of slow-motion bearings and slide-type bearings operating under high temperatures.
High Performance Industrial Oils and Dispersions
Molykote High Performance Mineral Oils; They are produced from mineral oils that have undergone hydrotreating processes, are highly saturated and contain almost no contaminants.
Molykote High Performance Synthetic oils; They have been produced in a way that they do not contain performance-reducing pollutants in order to meet the performance criteria targeted by chemical syntheses. There are new generation performance enhancing additives in its formulations.
Molykote Dipsersion products; They are products blended with the formulation of top quality solid lubricants or other lubricating additives dissolved in liquid lubricants.
Especially; It is preferred at points where it is desired to lubricate bearings that are difficult to reach or lubricate, to reduce friction, noise and heat with undamaged running-in, and to extend lubrication intervals.
With Molykote brand Industrial lubricants and dispersions produced for a wide variety of applications, you will get higher performance than you expect.
Compressor and vacuum pump oils, gearbox oils, chain oils, hydraulic oils and many other special and multi-purpose oils are available.
Anti-Friction Coatings (AFC)Molykote Anti-friction coating products; They are paint-like products and are produced by blending special solid lubricants at micron levels with carefully selected resin mixtures and solvents in the most appropriate raw materials and concentrations instead of paint pigments.
Dry film lubrication provides long-lasting wear protection.
Dow Corning's Molykote® brand anti-friction coatings are recommended for wear prevention and lubrication in dusty, dirty, humid and chemical environments and parts that are not easily accessible for maintenance.
Long-lasting, dry film lubrication
Molykote anti-friction coatings (AFC) provide a dry, slippery film that improves surface roughness and optimizes friction on the wear surface, even under extreme loads and harsh operating conditions.
With Molykote® Smart Lubrication™ solutions: Dry, clean lubrication that does not attract or collect dust, dirt or moisture
Durable long-term lubrication without evaporation or oxidation
Rust and corrosion resistance
Fully effective re-start even after prolonged standby
Sound reduction and cutting
It can be applied easily and cures quickly with a dry film.
Silicone Compounds
They are grease-like products formulated with silicone oils and silica additives. They are resistant to oxidation and thermal degradation over a wide temperature range. Especially; They are designed as a release agent and for O-ring lubrication and assembly, electrical insulators, lubrication and assembly of plastic and rubber group materials. They provide both sealing and lubrication functions.
Molykote brand silicone compounds are used in many demanding industrial sealing and lubrication applications that have proven effective worldwide.
As ENDÜSTRİ TEKNIK, we have represented DOW CORNING/MOLYKOTE Türkiye for 55 years.
Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.
