MEASUREMENT CONTROLLER NEXUS NX. 6000Q

NX.6000 Q INDUSTRIAL INSTRUMENTS THE NEXUS.6000 SERIES DEVELOPED FOR WATER TREATMENT AND INDUSTRY, ALLOW THE MEASURING OF: pH/REDOX, CONDUCTIVITY, TURBIDITY, CHLORINE, OXYGEN 2 ANALOGUE OUTPUTS output 1 programmable fortemperature measure/temperature measure output 2 /PID regulation, outputs limits are freely programmable between the range of measures 4 DIGITAL OUTPUTS on/off set point: set of the operating range (hysteresis /direction) and of start/stop time 000÷999 sec PID REGULATION pulse frequency or PWM ( 2 set point) ALARM reporting: instrumental anomalies, minimum, maximum, set point delay, permanence time (Live Check) ELECTRODES WASHING programming of the time leg, frequency: 00:00÷24:00 hh:mm, minimum time leg: programmable , during the washing phase, all digital and analogue outputs are freezed PANEL VERSION 96x96x133 mm TECHNICAL FEATURES DATA STORAGE INTERNAL FLASH 4 MB MEMORY (NEAR TO 16.000 RECORDS) DIGITAL INPUT TO DISABLE DOSAGE RS485 SERIAL INPUT FOR SET U P AND REAL TIME DATA ACQUISITION FROM REMOTE OR FOR STORED DATA DOWNLOAD (using a dedicated SW), USB TO DOWNLOAD (software required) MODBUS RTU COMMUNICATION PROTOCOL MANUAL CONTROLS POSSIBILITY TO SIMULATE ALL THE ANALOGUE AND DIGIPERTEM DIGIPERTEM SERVICE AT THE USER DIGIPERS TEMPERATURE KIT PT100 WITH 3 OR 4 WIRES, OR PT1000 128x64 PIXEL GRAPHIC DISPLAY, BACK LIGHTED VISUALIZATION SIMULTANEOUS VALUES OF THE MEASURE (NUMERIC+BARGRAPH) AND TEMPERATURE, ANALOGUE OUTPUTS VALUE INCYATA SCROLLING VALUE INCYATA SCROLLING, WASHINGTON, ITS ALARMS RANGE pH - 0÷14.00 resolution 0.01 pH RX - ±1500 mV resolution 1 mV CD - 0÷20 / 0÷200 / 0÷2.000 / 0÷20.000 / 0÷200.000 μS resolution 0.01 / 0 .1 / 1 / 10 μS CL - 0÷2 / 0÷5 / 0÷10 / 0÷20 ppm resolution 0.01 ppm TB - 0÷4.0 / 0÷40.0 / 0÷400 NTU resolution 0 ,01 / 1 NTU TB1 (Suspended Solid) - 0÷9999 gr/l OX - 0÷20 ppm resolution 0.1 ppm POWER SUPPLY 100÷240 VAC 50/60 Hz