MEASUREMENT CONTROLLER NEXUS NX. 6000S

NX.6000 S INDUSTRIAL INSTRUMENTS THE NEXUS.6000 SERIES DEVELOPED FOR WATER TREATMENT AND INDUSTRY, ALLOW THE MEASURING OF: pH/REDOX, CONDUCTIVITY, TURBIDITY, CHLORINE, OXYGEN 2 ANALOGUE OUTPUTS output 1 programmable fortemperature measure/temperature measure output 2 /PID regulation, outputs limits are freely programmable between the range of measures 4 DIGITAL OUTPUTS on/off set point: set of the operating range (hysteresis /direction) and of start/stop time 000÷999 sec PID REGULATION pulse frequency or PWM ( 2 set point) ALARM reporting: instrumental anomalies, minimum, maximum, set point delay, permanence time (Live Check) ELECTRODES WASHING programming of the time leg, frequency: 00:00÷24:00 hh:mm, minimum time leg: programmable , during the washing phase, all digital and analogue outputs are frozen WATERPROOF VERSION 144x144x120 mm TECHNICAL FEATURES DATA STORAGE INTERNAL FLASH 4 MB MEMORY (NEAR TO 16.000 RECORDS) DIGITAL INPUT TO DISABLE DOSAGE RS485 SERIAL INPUT FO R SET UP AND REAL TIME DATA ACQUISITION FROM REMOTE OR FOR STORED DATA DOWNLOAD (using a dedicated SW), USB TO DOWNLOAD (software required) MODBUS RTU COMMUNICATION PROTOCOL MANUAL CONTROLS POSSIBILITY TO SIMULATE ALL THE ANALOGPERTEUM PUURE AND DIGITAL KITCHEN TEMPERATURE SENSOR PT100 WITH 3 OR 4 WIRES, OR PT1000 128x64 PIXEL GRAPHIC DISPLAY, BACK LIGHTED VISUALIZATION SIMULTANEOUS VALUES OF THE MEASURE (NUMERIC+BARGRAPH) AND TEMPERATURE, ANAPERATURE, ANA OUTPUTS LOGPUTS LOGPUTS LOGPUTS OUTPUTS LOGIN, INGRAPHIC STAGES VALUES CYCLE, ALARMS RANGE pH - 0÷14.00 resolution 0.01 pH RX - ±1500 mV resolution 1 mV CD - 0÷20 / 0÷200 / 0÷2.000 / 0÷20.000 / 0÷200.000 μS resolution 0.01 / 0.1 / 1 / 10 μS CL - 0÷2 / 0÷5 / 0÷10 / 0÷20 ppm resolution 0.01 ppm TB - 0÷4.0 / 0÷40.0 / 0÷400 NTU resolution 0.01 / 1 NTU TB1 (Suspended Solid) - 0÷9999 gr/l OX - 0÷20 ppm resolution 0.1 ppm POWER SUPPLY 100÷240 VAC 50/60 Hz