How to attach the reel to the boatIntroduction: Have you ever had to attach a boat propeller to a mast? This is a common question and can be difficult. In this article, we'll show you how to do it the right way. We'll also give you some tips on how to ensure your prop Addons stay safe.
How to Attach the Reel to the Boat.
1. first remove the screws holding the reel in place on the side of the boat
2. Attach the white threaded connector to the top of the reel using a long screwdriver (or similar tool) and turning it clockwise until it clicks into place.
3. then use a shorter screwdriver to attach the black threaded connector to one end of the white connector
4. Twist both connectors together until they are tight together, then tighten with a wrench
How to use the reel.
1. To start using the reel, insert the white connector into one end of the black connector and twist together until they are firmly seated.
2. To use the reel, hold the reel with one hand and with the other hand twist the black connector to form a loop
How To Use The Pulley.
2.1. Connect the reel to the boat's engine and turn it on.
2.2. Attach the pulley to the motor shaft and turn clockwise to lift the boat out of the water.
Using the Reel to Get the Boat Out of the Water.
If you want to get your boat out of a dock or other obstacle in the water, you can use a pulley system to do so. To attach the spool, tie one end of a spool to a post on either side of the obstacle and then thread a loop through each end of the spool, pulling from one side until your boat clears the obstacle.
Using the Reel to Get the Boat Out of the Water.
To put the boat on the reel, you must first make sure that the reel is properly secured. Then use the reel's pliers to remove one of the clamps holding the reel to the slot. Once removed, align the notch on the new spool with one of the marks in the slot and screw it in place. Finally, use a piece of wood or metal tape to secure both ends of the reel in place.
Using the Reel to Anchor the Boat at the Dock.
If you want your boat to be Anchored at a later date, you will first need to use a different method than the one described. Mooring involves attaching two pieces of hardware directly to either side of your boat (or any other object) and then securing them in place with nails or screws. Consult a marine or an online tool like Marine Jacks or Marine Bolts for more information on this process.
conclusion
1. attaching the reel to the boat
2. using the reel to take the boat out of the water
3. Using the reel to dock the boat