SF6 GAS SEPARATOR

SF6 Gas Separators are sealed in an epoxy resin cast body, with a "sealed pressure system"; It has 3 poles and 2 positions. Separators, which are filled with SF6 gas at 1.5 bar pressure during the production phase and whose gas tightness is checked at the factory, are presented to the user; It is in a structure that does not require gas reinforcement during its 20-year operating life under normal conditions. Due to the fact that the separator body is a single piece, the joint surfaces that may cause gas leakage are minimized as much as possible and SF6 gas tightness is guaranteed. In the event that the SF6 gas pressure unexpectedly rises to a dangerous level during operation, a membrane is located on the rear cover of the separator body to ensure that the gas is discharged in a way that does not pose a hazard to the operating personnel. Earthing switch ensuring the safety of operating personnel; It is designed to be capable of closing on short circuit in accordance with the standards and to be mounted outside the epoxy body as air-insulated. There is a mechanical interlock between the disconnector and the earthing switch to eliminate the possibility of wrong manoeuvring. Closing and opening operations are performed manually in the separator mechanism. The closing process of the earthing switch is completed independently of the operator movement with the installation of the spring, and the opening process is completed depending on the operator's movement. The operating mechanism is supervised by position indicators that reliably show the open and closed positions of the contacts. As standard, 2NO+ 2NC auxiliary contacts are provided; Additional contact can be provided upon request. • Long operating life, • High operational safety and electrical resistance, • Economical operation thanks to maintenance-free active parts,