TORK S1010.00.040 GENERAL PURPOSE VALVES (DIA: 1/8'')

S1010 Series Direct Acting General Purpose Normally Closed Solenoid Valve (DIA:1/8") Fluid: Air, Water, Gas, etc. PRODUCT DESCRIPTION S1010 Series, Direct Acting (min.Δp=0 bar) and Pilot Controlled( min.Δp =0,5 bar) Max: 9 bar operation General Purpose Solenoid Valves Series: S10 Series Application: Air, Water, Gas, (it is recommended to put a filter on the valve inlet for dirty fluids) Size: 4 mm 1/8", 1/4" Pole Withdrawal, BSP (NPT On Demand) 3/8"…2" Pilot Operated, BSP (NPT On Demand) Pressure : 0…9 Bar (1/8", 1/4") 0.5…12 bar (3/ 8"...2) Sleeve , Core : Stainless Body : Brass Diaphragm : NBR, EPDM or VITON upon request Temperature : -10°C…80 °C Position : Normally Closed Coil Voltage : 230V, 110V , 48V, 24V , 12V HUNGRY ; 110V , 48V , 24V , 12 V DC Protection Class : IP65, IP68 (tested under water for 72 hours at 10 meters), optional ATEX Exproof GENERAL FEATURES • It has wide pressure range, flow rate and orifice options. • Solenoid valves must be used with filters. • Solenoid valves can be mounted in any position without affecting their operation; The coil should be preferred in the vertical up position. ELECTRICAL CHARACTERISTICS Continuous Energization : ED 100% Coil Insulation Class : H (180°C)(IEC 85) Coil Coating : Reinforced Fiber Glass Ambient Temperature : -10°C, +60°C Protection Class : IP65 (ISO 60529) Request On; IP68 Socket Connection: DIN 46340 3-pole Socket (DIN43650) Socket Features: ISO 4400 / EN 175301-803 Form A, Terminal (Cable Ø6-8 mm) Electrical Safety: IEC 335 Standard Voltage: AC 12V 15VA, 24V 15VA , 48V 15VA, 110V 15VA, 230V 15VA, 230V 24VA DC 12V 18W, 24V 18W, 48V 18W, 110V 18W Other voltages on request Voltage Tolerance : AC -15%, +10% DC -5%, +10% Frequency : 50 Hz (60 Hz…) PRODUCT MATERIALS Body : Brass Internal Parts : Stainless Steel Diaphragm : NBR On request; EPDM, VITON Ring: Copper (EN 12735-1) Core, Sleeve, Spring: Stainless Steel solenoid valve prices,