TÜRKİYE / KOCAELİ
DT500 C+Y AXIS TURNING CENTER Unit DT500 CAPACITY Turning diameter on the counter mm Ø 500 Turning diameter on the transverse support mm Ø 300 Maximum turning diameter mm Ø 240 Maximum workpiece length mm 400 SPINDLE Chuck size inch 8" [Opt. 10"] Spindle bore diameter mm Ø 66 [Ops. Ø 100] Working diameter from bar mm Ø 52 [Ops. Ø 75] Spindle face A2-6 Spindle speed rpm 4000 [Opt. 2500] Spindle motor power kW 15 STABILIZER (OPTIONAL) Chuck size inch 5" Spindle bore diameter mm Ø 37 Working diameter from bar mm Ø 29 Spindle face A2-4 Spindle speed r/min 5000 Spindle motor power kW 7.5 AXES X axis travel mm 160 Z axis travel mm 400 Y axis travel mm 100 (± 50) Guide types Roller type linear bearing Guide sizes (X/Y/Z) 34/45/45 Ball screw shafts diameter and pitch X/Y: Ø32xP10 Z:/ Ø40xP10 SPEEDS X/Y/Z axis no-load speeds m/min 20 X/Y/Z axes max cutting speed mt/min 10 TURRET Turret type BMT45 Number of turret stations Quantity 12 Outer diameter holders shaft size mm 20x20 Inner diameter holder shaft diameter mm Ø 32 Milling cutters motor power kW 3,7 Milling cutters speed r/min 5000 COUNTER SPOT Tailstock type Hydraulic, programmed Pinol inner taper MT4 Counter center movement mm 400 OTHER Mains power requirement kVA 26 Dimensions (Without chip conveyor) mm 2450x1850x2200 Weight kg 4500
Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.
