PP POLYPROPYLENE BODY | CHEMICAL AND ACID PUMP WITH MAGNET

Magnetic Pump In the magnetic acid pump, the movement between the motor and the pump is transmitted without contact with the help of magnets. In this way, the problems arising from the seal are prevented and high resistance against dry running and installation faults is ensured. The magnetic pump is especially preferred in the transfer of valuable liquids, where maintenance is not possible and the process is continuous and sensitive. The bearings and body material of the magnetic acid pump are specially selected according to the usage area and the characteristics of the liquid to be transferred. Our magnetic pumps are completely DOMESTIC PRODUCTION. The biggest advantage of using magnetic coupling pumps is that no sealing equipment is needed. For this reason, as in other pumps, there is no such thing as the wear and danger of sealing equipment (O ? ring, seal, gasket, etc.) over time. In addition, the pumps in which such equipments are used must undergo continuous maintenance. Because, in processes where flammable, combustible, toxic, radioactive chemicals that are harmful to human health or the environment are used, even very small leaks can pose great dangers. However, such risks can be minimized or even reduced to zero when a magnetic pump is used. Since the pumps are LOCAL PRODUCTION, you will not have any problems in supplying spare parts. In applications where magnetic driven pumps are used, maintenance costs are low and maintenance periods are long. A magnetic pump can operate for many years under normal conditions without requiring any intervention (repair, maintenance, repair, etc.). This makes it possible to reduce operating costs to lower levels in general. In addition, the assembly operations of such pumps can be done more easily and quickly than many other pumps. Magnetic Acid Pump Usage Areas Magnetic Acid Pump is especially used for corrosive liquid circulation, acid circulation and filtration. Chemical Processes Electroplating Industry Industrial Applications Chemical Transfer and Filtration Galvanizing Facilities Coating Facilities Anodizing Facilities Treatments Gas Washing (Scrubber Systems) Acidic Liquids Basic Liquids Salt Water and Sea Water Model Body Capacity (m³/h) Max. Pressure (Bar) Input - Output Power Cycle AY-8-3-M PP Polypropylene 20 1.5 50 / 32 1.1 kW 3000 d/d Polypropylene It has good resistance against acids. It is preferred in food, chemical and cosmetic products. It is suitable for use at temperatures between 0˚C and 82˚C. Fluids suitable for the use of the pump fluid pump body Milk polypropylene alum polypropylene fertilizer polypropylene polypropylene antifirmin polypropylene polypropylene arsenic acid polypropylene white globoPopylene zinc polypropylene phosphoric acid 10-20 %polypropylene glycelerin polypropyic acid polypropyic acid polypropyic acid polypropylene polypropylene polypropylene NITRIC ACID 10% POLYPROPYLENE NEUTRAL SUD POLYPROPYLENE SULFURIC ACID 10%-75% POLYPROPYLENE CAUSTIC POLYPROPYLENE WASTEWATER POLYPROPYLENE WATER BASED GLUE POLYPROPYLENE AD - BLUE POLYPROPYLENE SULFURIC ACRYLIE POLYPROPYLENE CAUSTIC POLYPROPYLENE WASTE GLUE POLYPROPYLENE AD - BLUE POLYPROPYLENE POLYPROPYLENE CAUSTIC POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPHOSPHYPYPHYPYPHYPYPOLPHYPROPYPYL 50CRYLIC ACRYLIC ACRYLIC-POSPHYPYPYPY POLPHYPHY POLPHURIC SULFURIC GLUE 50% GLUE POLYPROPYLENE GALVANIZED COATING WATER POLYPROPYLENE CHROMIUM WASTEWATER POLYPROPYLENE IRON CLORIDE POLYPROPYLENE LAC POLYPROPYLENE METAL COATING(GALVANO) POLYPROPYLENE NITRIC ACID %25 POLYPROPYLENE PARAPHINE POLYPROPYLENE IRON CLORIDE POLYPROPYLENE METAL COAT HP : 1.5 HP kW : 1.1 kW Voltage : 220 Volt (Single Phase), 380 Volt (Three Phase) Max. Flow rate m3/h: 16-25 m3/h Max. Height mSS : 11-20 mss Input Size: 2" - 50 mm Output Size: 1.1/4" - 32 mm Revolution R/D: 3000 rpm





AY-8-3 M MAGNETIC PUMP PP POLYPROPYLENE BODY | CHEMICAL AND ACID PUMP WITH MAGNET