CAMPA DUAL-DIRECTIONAL HONEYBOARD CLEANING MACHINE PRO-3

Model Comparison Bestselling Model PRO-1 PRO-2 PRO-3 PRO-4 Bidirectional (Backwash) No No Bidirectional Bidirectional Heating Resistance No 2000 Watt No 2000 Watt Pressure (mss) 4 Bar 4 Bar 4 Bar 4 Bar Flow Rate ( m³/h) 60 L/H 60 L/H 60 L/H 60 L/H With 2 Years Complete Warranty (All parts are guaranteed, including engine combustion) in the Kampa Pro-3 model, from combi boiler to honeycombs and chemical cleaning of large installations, It is specially produced for processes such as draining the installation water, filling new water. There are cleaning, filling and emptying connections on the machine. In this way, it is a special machine that can clean effortlessly and quickly from a single point. Backwash can press the water into the installation from both directions, thanks to its double-direction feature. Double-sided honeycomb cleaning machines do 26% better cleaning. Our machine is designed not to be damaged by chemicals and to operate without any problems for many years. Its body is made of hard quality plastic and its motor is made of a plastic jet pump. In this way, while the product is cleaning the engine, the residue does not corrode due to chemicals, and the engine pressure and flow rate does not decrease, and it maintains its first day performance for many years. Technical Specifications Model: Pro-3 Liquid Reservoir: 40 Liter Pressure: 4 Bar Liquid Flow: 60 Liter / Minute Voltage: 220 Volt Heater Resistance: No Engine Power: 600 Watt 0.8 Hp Energy Cable: 3 Meters Plug-in Cable Weight: 19.6 kg Dimensions (L x D x H): 35 cm x 45 cm x 75 cm Engine Installation cleaning machines are the most important part of the machine that ensures the delivery of liquid. It is the main factor affecting the cleaning performance and quality of the machine. It can clean with maximum efficiency in all closed-circuit systems such as All parts of the pump that come into contact with the liquid are made of plastic and stainless material, so you can use it for many years as it was the first day without experiencing any breakdown or loss of performance, such as corrosion and melting, due to the chemicals used in cleaning and the residues passing through it. The pump has copper winding and thermal protection. Filter and Cover The cover and filter system used in the machine has a very modern and useful structure. Since the diameter of the filters and covers is 220 mm, it provides easy filling, evacuation and observation. The cover is easily opened and closed by turning it to the right and left, and there is an extra lock system for security. The basket filter system was used in our machine for the first time in the world and it is registered. Thanks to the basket filter under the cover, you can see the pollution during operation, clean it very quickly and simply and replace it again. We are so confident in our Full Protection Machine that all parts of the honeycomb cleaning machine are under warranty for 2 years. A liquid level control device is used in the machine, so if there is not enough liquid in the machine, the machine does not start the heater, preventing possible tank burning problems and you will never experience such a problem. Since the body of the product is made of chemical-resistant plastic parts that come into contact with the engine and liquid, you can use the machine for many years with the same efficiency as the first day, without experiencing wear or decrease in performance over time. Pressure Gauge (Manometer) While cleaning the honeycomb, the manometer on the machine will give us information such as the efficiency of the machine, the working pressure and whether there is a blockage in the system. The lower the pressure the machine works, the better it will clean because it will transfer plenty of water and show that there is no blockage in the system. If there is a blockage in the system, the pressure of the machine will increase, until the pressure returns to the normal level, that core is cleaned and the blockage is removed. It automatically adjusts the machine pressure according to the pressure in the system, there is no need for manual intervention. Heat Indicator (Thermometer) In our honeycomb cleaning machine, a temperature indicator, namely a thermometer, is used to observe the temperature of the circulating liquid during cleaning. Thanks to this temperature indicator, it allows you to observe the temperature of the liquid and intervene or adjust the temperature at the desired rate. The placement of the product on the device has been carefully placed as seen in the pictures. Since the product is placed on the machine in a recessed manner, it is designed in such a way that the machine will not be damaged in case of overturning or impact. Product Advantages 4 bar pressure and 60 l/min. for a perfect cleaning. It has water flow. There is no jamming problem in the pump of the machine and it does not require maintenance when it is not used for a long time. It has a large and easy-to-lock top cover, for controlling contamination during cleaning and for easy filling. Add professionalism to your work with its ergonomic structure, easy use and stylish structure. The pumps used in our machine have copper winding and thermal protection. 100% domestic production and continuous supply of spare parts Our product is under the guarantee of our company for 2 years