GEL BOY C 15 SUPER INSTALLATION WASHING MACHINE

GEL BOY C 15 SUPER INSTALLATION WASHING MACHINE, Building Construction
GEL BOY C 15 SUPER INSTALLATION WASHING MACHINE, Building Construction

GEL SIZE C 15 SUPER INSTALLATION WASHING MACHINE GEL Size C 15 Super Installation washing machine Vertical axis pump for limestone removal in boilers and small heat exchangers. Equipped with a patented GEL flow reversing device, which is highly effective if the pipes are completely clogged. Depending on the year of use, the characteristics of the water used, heat and oxygen, lime, scale, sediment and sludge occur in closed circuit heating systems, especially sludge is seen more intensely in underfloor heating systems. These formations cause heating problems, poor heating and expensive heating problems in heating systems. The negativities caused by the formations in the heating system; – Incomplete heat transfer. The heat is not distributed homogeneously in the heater cores, the lower sides do not heat up, even some of the cores do not heat at all, due to the sedimentation formed especially at the bottom of the cores. Unheating problems in areas where clogged pipes pass due to sludge and sedimentation in underfloor heating systems. Pump and heat exchanger problems as a result of transporting the pollution in the installation and honeycombs to the combi boiler. The heat exchanger cannot produce the desired hot water due to limescale and clogging. Failure to circulate as a result of the boiler reaching a high temperature within 1-2 minutes and shutting itself off due to pollution. Rotting of the system, the formation of cracks in the underfloor heating pipes. The result: High energy cost, repair costs and insufficient heating. (GEL HYDROTECNOLOGY) jetpump is a pump designed for heating installation. (GEL HYDROTECHNOLOGY) The most important feature of the jet pump is that it creates a sweeping effect, not a pressure, on the applied surfaces. With the help of the chemical used while passing through the surfaces, it thins the lime or mud layer on the surface every time it sweeps the surface and accumulates it in the jetpump tank. This application takes an average of 60 minutes depending on the condition of the installation. RESULT: - Up to 30% fuel savings - COMFORTABLE HEATING

Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.