COAL PACKAGING PLANT

They are manufactured for the purpose of packaging coals with a maximum size of 110 mm of classified coal to be used in residences and industry. In this facility, which is covered with trapezoidal sheet, weighing is done with electronic load-cells. In addition, there is a counter so that you can produce the desired number of products. Bags packed in 25 and 40 kg are sewn with fixed sewing machines. Every part of the facility is open or closed upon request. A ladder has been designed for you to safely go up to the 2nd floor of the packaging machine. WALNUT "20mm/55mm" LEMON "55mm/80mm" ORANGE "80mm/120mm" COAL PACKAGING FACILITY. theoretical capacity is 36 - 42 Tons/hour. (1440-1680 Bags/hour in 25 kg bags) In the facility; There is a 9 m3 feeding hopper no. 1 and a dosing conveyor under it in order to deliver the material regularly. The material in the bunker is transferred to the stock bunker of the packaging machine no. 3 with the conveyor no. 2 B=650 mm wide and L=22.000 mm long. There is a collecting chute on the top of the bunker so that the conveyor can deliver the material to the stock hopper regularly and homogeneously. There is a high level switch on the stock hopper. When the bunker is full, the switch gives a warning and stops the feeding band and the vibrating transmitter. Bunker emptying is timed and when the time comes, it automatically operates the feeding bunker and the dosing conveyor. There are four B=500 mm wide dosing bands under the stock bunker. The material coming from the dosing band to the automatic weighing scales is weighed here at the desired weight. The coal that has been weighed into the bags is filled by pressing the start switch of the person who is waiting at the bottom of the bag filling throat. At the same time, the scale flaps are closed with the pneumatic system and the weighing process starts again automatically. Meanwhile, the other dosing band is full and ready. Both dosing tape buckets are combined in a single throat. full bags; It moves on the sewing bands No. 4 of B=500 mm width and is sewn by one person with a sewing machine. The bags coming from both seam bands in a sewn state fall on the collecting band 5, and the bags transferred to the loading band no 6 from there are stacked on trucks via this band. In the facility; A total of seven people are employed, two of whom are at the bag filling mouth, two at the sewing band, two at the loading conveyor exit and one as the scoop operator. The controller keeps the values ​​set with the numeric keypad in its memory and provides the operation of the system with the start command. It produces contact outputs at the set weight values. During the process, communication with the operator is done via the LCD screen. It automatically tests itself. It has an automatic reset feature. It stores the used and filled materials in its memory and does not lose the information in its memory in case of power cuts. When the electricity comes back, it continues from where it left off. They are produced automatically and manually. www.senolmakina.com.tr info@senolmakina.com.tr 0533 364 22 13