MAGNETIC PUMP MONOPHAZE (220 V) CHEMICAL AND ACID PUMP

Magnetic Pumps are designed to pump toxic and other hazardous liquids without the use of mechanical seals. Magnetic pumps are a type of pump powered by the use of the science of magnetism rather than electricity from an external source. Magnetic pumps are energy efficient and do not require packing or oil seals for operation. Magnetic pumps circulate a variety of liquids including acids, water and oils. Since magnetic pumps do not have a mechanical seal, there is no possibility of dangerous chemical leakage or pump overheating due to a blockage. The general features of magnetic pumps include a rotating impeller in a closed enclosure supported by a magnetic field, generated by magnets. The rotation of the impeller generates a force that feeds fluid through and out of the pump's housing. The main purpose of the pump is to conserve energy and motion in a liquid. Magnetic pumps have magnets attached to the impeller and motor. Permanent magnets are attached to the drive assembly of the pump. The driving magnet is connected to a second shaft driven by the motor, the magnet driving the inner rotor. When the motor turns on, it turns its magnet. The magnetic force from the magnet of the motor causes the magnet in the propeller to rotate and rotate the propeller. Magnetic pumps are centrifugal pumps, that is, the liquid pumped through the system exits at a different point from where it is sucked into the pump. The rotation of the impeller causes the fluid to increase in energy and increase the pressure at which the fluid is discharged from the pump. This increase in pressure is what keeps the fluid from moving. Pump body :GFRPP Polypropylene Impeller :GFRPP Polypropylene VOLT RANGE MAXIMUM FLOW MAXIMUM HEIGHT INLET OUTPUT 220~240V 50 / 60Hz 16-19 lt/min 2.7-3.4 m 14 mm Polypropylene It has good resistance against acids. It is preferred in food, chemical and cosmetic products. It is suitable for use at temperatures between 0˚C and 82˚C. Fluids suitable for the use of the pump fluid pump body Milk polypropylene alum polypropylene fertilizer polypropylene polypropylene antifirmin polypropylene polypropylene arsenic acid polypropylene white globoPopylene zinc polypropylene phosphoric acid 10-20 %polypropylene glycelerin polypropyic acid polypropyic acid polypropyic acid polypropylene polypropylene polypropylene NITRIC ACID 10% POLYPROPYLENE NEUTRAL SUD POLYPROPYLENE SULFURIC ACID 10%-75% POLYPROPYLENE CAUSTIC POLYPROPYLENE WASTEWATER POLYPROPYLENE WATER BASED GLUE POLYPROPYLENE AD - BLUE POLYPROPYLENE SULFURIC ACRYLIE POLYPROPYLENE CAUSTIC POLYPROPYLENE WASTE GLUE POLYPROPYLENE AD - BLUE POLYPROPYLENE POLYPROPYLENE CAUSTIC POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPHOSPHYPYPHYPYPHYPYPOLPHYPROPYPYL 50CRYLIC ACRYLIC ACRYLIC-POSPHYPYPYPY POLPHYPHY POLPHURIC SULFURIC GLUE 50% GLUE POLYPROPYLENE GALVANIZED COATING WATER POLYPROPYLENE CHROME WASTEWATER POLYPROPYLENE IRON CLORIDE POLYPROPYLENE LAQ POLYPROPYLENE METAL COATING(GALVANO) POLYPROPYLENE NITRIC ACID 25% POLYPROPYLENE PARAPHYLENE IRON CLORIDE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE POLYPROPYLENE 220% VoltaProxyProxyProxyProxyProxyProxyLACE WATER 25% Volt. Flow rate m3/h: 0-5 m3/h Max. Height mSS : 1-10 mss Input Size : 1/2" - 15 mm Output Size : 1/2" - 15 mm