MOBILE FEEDBACK UNIT

Aggregate used in concrete production must be loaded into the aggregate feeding unit bunker by a loader. For loading with conventional methods, a loading ramp was created to the side of the goods entrance of the aggregate bunker. The loader operator would go up the ramp by filling the bucket from the stockpile and pour the aggregate into the bunker and go down to refill the bucket, and so on. Thanks to the BETALFA-manufactured aggregate feeding unit, there is no need to create a separate ramp and loader operators do not have to go up and down the ramp every time. Main Equipment and Features: Trailer Chassis: King Pin diameter is 2”. Transport dimensions Width: 2.000mm; Length: 12,250mm; Height: 4.000mm. It is mounted on a single axle with scissors. (290 mm x 290 mm x 2.000 mm) Equipped with brake system and lighting devices in accordance with regulations. All metal surfaces have been cleaned after welded manufacturing and a top coat paint should be applied after the primer. Aggregate Bunker: It is designed to have a geometric volume of 5 m3 and has a 5 mm diameter. It is manufactured using St-37 sheet metal. On the upper surface of the bunker, there is a 100mm x 100mm mesh grid that does not allow the passage of large materials. Conveyor Belt Features: Sergeant type conveyor belt with 800x19.000 mm dimensions. Engine power: 15 kw Gamak Reducer: Dissan type locked reducer.     One side walkway, guardrail and ladder. Maintenance platform on the spill side. Rotating chute coupled with camera-controlled brake motor, which can rotate 360 ​​degrees in pouring. Covered against dust