PEDROLLO CKM 90 - E FUEL, FUEL AND OIL PUMP SINGLE PHASE

Pedrollo CKm 90-E Diesel and Oil Transfer Pump is used as a diesel and oil transfer pump. Suction depth 9 m. Maximum bar pressure 5.1 Bar Pump Motor Power: It works with 1 Hp 220 volts (household electricity). Input/Output: 1"(25mm) Maximum delivery height 51 meters vertically and 510 meters Horizontal Tons per hour m³/h Vertical Discharge Distance Horizontal Discharge Distance Horizontal 0 51 m 510 m 0.3 49 m 490 m 0.9 41 m 410 m 1.5 33 m 330 m 2.1 25 m 250 m 2.4 21 m 210 m 3.0 13 m 130 m Pump Type Power HP Inlet Output m³/h 0 0.3 0.9 1.5 2.1 2.4 3.0 CKm 90-E 1 1" 1" H (meter) 51 49 41 33 25 21 13 Pump Type Connection Dimension mm CKm 90-E DN1 DN2 a f h h1 h2 h3 i m n n1 w s 1" 1" 41 260 159 128 25 153 75 80 120 100 69 7 1- Pump Body Casting 2- Motor Cover Aluminum (Bronze Plated) ) 3- Fan Bronze 4- Motor shaft Stainless Steel 5- Mechanical Seal 6- Bearing 7- Capacitor 8- Motor Installation Materials If your pump is sucking from the same level or higher code, you must use a check valve in the suction line. Click to buy check valve If your pump is sucking below its own level, that is, from a negative code, it is absolutely necessary to ensure that there is no air flow. ape should be used. Click to buy a valve. You can purchase a strainer to prevent your pump from being damaged by the impurities formed in the water at the time of suction. Click here to buy a strainer. Click here to take a look at the other fasteners you will definitely need. HP : 1 HP kW : 0.55 kW Voltage : 220 Volt (Monophase) Max. Flow rate m3/h: 0-5 m3/h Max. Height mSS: 51-75 mss Inlet Size: 1" - 25 mm Outlet Size: 1" - 25 mm Suction Depth: 8 Meters