SUMAK SM300/2 CENTRIFUGAL PUMP SINGLEPHASE (220V) 3HP

What is Sumak SM 300/2 Centrifugal Water Pump? It is a mechanical machine that is frequently used in liquid transfers and agricultural irrigation areas. This type of pumps can suck from a depth of 6 meters and can pump water up to 31 meters vertically and 310 meters horizontally. The pump has a 3Hp motor and works with household electricity (220 V). Click for the three-phase (380V industrial electricity) model of the pump. The inlet and outlet of these pumps, which can be used in hot water applications up to 90°C, are 2” (50mm). They are single-stage centrifugal pumps. What are the Usage Areas of Sumak SM 300/2 Centrifugal Water Pump? They are used in agricultural (drip and release) irrigation, and in the discharge of less polluted water. Features of Sumak SM 300/2 Centrifugal Water Pump Engine Power: 3Hp Input/Output: 2”(50mm) Suction Depth: 6m Maximum Head: 31m Revolutions Per Minute: 2900 d/d ACCORDING TO THE GRAPH ABOVE SM 300/2 PRESSURE AMOUNT VERTICAL PRESSURE HEIGHT HORIZONTAL PRESSURE LENGTH 6 TON 31 m 310 m 9 TON 29 m 290 m 18 TON 26 m 260 m 24 TON 21 m 210 m 32 TON - - ENGINE PUMP TYPE KW HP V A D/D CAPACITOR SUCTION m IN OUTPUT W mm L mm H mm KG m³/h 6 12 18 24 32 SM 300/2 2.2 3 220 6.3 2900 25/450 6 2" 222 426 290 15 MSS 31 29 26 21 7 Plumbing Materials If your pump is sucking from the same level or higher code, you should use a check valve in the suction line. Check valve must be used in the discharge line of the separator pump. Click to buy check valve. If your pump is sucking below its own level, that is, with negative code, a valve must be used to prevent air from forming. Click to buy a valve. You can buy it. Dirty Click to buy k holder. Click here to take a look at the other fasteners you will definitely need. HP : 3 HP kW : 2.2 kW Voltage : 220 Volt (Monophase) Max. Flow rate m3/h: 16-25 m3/h Max. Height mSS: 31-40 mss Inlet Size: 2" - 50 mm Outlet Size: 2" - 50 mm Revolution R/D: 2900 d/d Suction Depth: 6 Meters