TRANSFORMER-FREE 3 PHASE UNINTERRUPTED POWER SUPPLY DS-POWER HIGH

DS-POWER HIGH (100-600kVA) GENERAL FEATURES TECHNICAL SPECIFICATIONS Thanks to online, double conversion technology developed entirely with IGBT and DSP, Tescom DS Power High series provides power quality and maximum protection for all kinds of computing devices or industrial loads, especially critical loads. . The DS Power High series is classified as VFI SS 11 (Voltage and frequency independent) in accordance with IEC EN 62040-3. DS Power High series has been designed with a new configuration that includes an IGBT rectifier, which is preferred instead of traditional thyristor rectifiers at the input. MODEL DSH 100 DSH 120 DSH 160 DSH 200 DSH 250 DSH 300 DSH 400 DSH 500 DSH 600 Power (kVA) 100 120 160 200 250 300 400 500 600 INPUT Voltage 380/400/415 VAC 3F + N + Earth Frequency range 45-65Hz Power factor (at 100% load) ≥ 0.99 vTHDI (at 100% load) ≤ 3% Frequency tolerance ± 2% (from ± 1% to ± 5% front panel selectable) OUTPUT Power (kVA) 100 120 160 200 250 300 400 500 600 Active power (kW) 90 108 144 180 225 270 360 450 540 Voltage 380/400/415 VAC 3F + N Voltage tolerance ± 1% (static), ± 5% (dynamic 10ms) Voltage THD < 1% at linear load / < 3% Efficiency at non-linear load (100% load) ≥ 95% Frequency tolerance 0.05% (on battery operation) Frequency 50Hz / 60Hz Crest factor 3:1 Overload capacity 60min at 110% load; 10 minutes at 125% load; 1min at 150% load Battery Type VRLA AGM, GEL, NiCd Number of batteries 40x12V(480 VDC) Ripple current Zero, “0” Charge voltage compensation 0.5 V x ºC GENERAL Net weight (kg) 656 700 800 910 1000 1400 1700 2100 2400 Dimensions (mm) WxDxH 800x850x1900 1000x850x1900 1500x1000x1900 2100x1000x1900 Alarm signal Dry contacts (adjustable) Remote control Bypass (adjustable) Communication Dual RS232 + dry contacts + 2 slots for communication interface Ambient temperature 0ºC – 40ºC ECO-mod efficiency to 98.5% up to Relative humidity < 95% (non-condensing) Color RAL7016 Noise level 63-68 dBA 70-72 dBA Protection class IP20 (higher protection class optional) Standards EN62040-I-I ; EMC:EN62040-2 Classification (according to IEC62040-3) (Voltage frequency independent) VFI-SS-111