MAXPRO 200 1 PLASMA UNIT

Maxpro 200 1 General Information It is a Water Cooled Plasma Cutting Unit with Inverter Technology. Precise Amperage Adjustable with Feedback Electronic Technology and the amperage is not affected by ambient effects. Thanks to the latest technology and new generation Torch structure, it has a longer life consumable consumption compared to its competitors. Excellent results can be achieved in both thin material and thick material. The Mains Voltage is 400 VAC, CE, 3-PH, 50 – 60 Hz, the Power drawn from the mains is 21.9 KW and the ampere drawn is 54 Amperes. Consumption Rates are quite low. Output Voltage is 165 VDC and 200 Amps. Duty cycle 100% at 200 Amps. The Open Circuit Voltage is 360 VDC maximum. It measures 102 x 69 x 105 cm and weighs 335 KG. It only works with dry air or nitrogen. Material Current (amps) Thickness (mm) Approx. cutting speed (mm/min) Thickness (inches) Approx. cutting speed (ipm) Mild steel Air plasma Air shield 50 1 3 8050 3760 20 ga 0.135 340 110 Air plasma Air shield 130 6 12 3865 2045 1/4 1/2 150 75 Air plasma Air shield 200 6 12 20 25 32 50 4885 2794 1415 940 630 215 1/4 1/2 3/4 1 1 1/4 2 190 110 60 35 25 8 O2 plasma Air shield 50 1 3 6775 3650 20 ga 0.135 270 130 O2 plasma Air shield 130 6 12 3925 2200 1 /4 1/2 150 80 O2 plasma Air shield 200 6 12 20 25 32 50 6210 3415 1920 1430 805 270 1/4 1/2 3/4 1 1 1/4 2 235 130 80 55 32 10 Stainless steel N2 plasma N2 shield 200 12 20 220 1140 1/2 3/4 80 50 Air plasma Air shield 200 12 20 3050 1520 1/2 3/4 120 60 Usage Areas Red Line Pro Line