POWERMAX 85 PLASMA UNIT

Powermax 85 General Information It is a Plasma Cutting Unit with Inverter Technology. Precise Amperage Adjustable with Feedback Electronic Technology and the amperage is not affected by ambient effects. Thanks to the latest technology and new generation Torch structure, it has a longer life consumable consumption compared to its competitors. Excellent results can be achieved in both thin material and thick material. Mains Voltage 400V / 50 - 60 Hz HZ The power drawn from the mains is 12.2 KW and the ampere drawn is 20.5 Amperes. Consumption Rates are quite low. Output Voltage is 139 VDC and 85 Amps. The On-Off rate is 100% at 65 Amps and 60% at 85 Amps. Open Circuit Voltage is Maximum 275 VDC. It measures 500 x 234 x 455 mm and weighs 28 KG. It only works with dry air or nitrogen. Capacity Thickness Cut Speed ​​Cut Recommended 25 mm (1") 500 mm/min (20 ipm) 32 mm (1-1/4") 250 mm/min (10 ipm) Side Entry 38 mm (1-1/2") 125 mm/min (5 ipm) Piercing 20 mm (3/4") Applications Hvac Line Red Line Specification Material Thickness Current Production cut speed * inches amps ipm /min Mild steel 1 / 4 6 85 160 4400 1 / 2 12 85 56 1600 3 / 4 20 85 29 680 Stainless steel 1 / 4 6 85 164 4600 1/2 12 85 48 1400 3 / 4 20 85 24 570 Aluminum 1 / 4 6 85 172 4900 1/2 12 85 68 1930 3 / 4 20 85 37 880