SOCKET TYPE HYDRAULIC TORQUE WRENCH

TORSIONX SOCKET TYPE HYDRAULIC TORQUE WRENCH • 700 bar maximum working pressure • 6 different models up to 25.000 N.m • Continuously repeatable torque accuracy of ± 3% • 360° x 180° multi-position rotatable oil inlet block • Torsion holding latch • Different sizes heavy air socket options • Continuous operation at max. working pressure • Practical use suitable for tightening and unscrewing direction • Operation in full automatic mode is optional • 360° rotatable support leg with safety mechanism • Changing the tightening and unscrewing direction with a single button • Service, calibration in Turkey and spare parts support • CE Certificated, 3 Years Warranty, USA of Origin, Manufacturer IBT MODEL .7 MD 1 MD 3 MD 5 MD 10 MD 17 MD Torque Capacity (Nm) 86 – 1.076 169 – 1.787 366 – 4.294 729 – 7.430 1.423 – 15.193 2.223 – 25.000 Square Drive 3/4″ 3/4″ 1″ 1.1/2″ 1.1/2″ 2.1/2″ Weight (kg) 1.45 2.27 5 8.16 14.51 27.67 L1 (mm) 99.1 122.7 157 189.7 237.7 275.6 L2 ( mm) 129 158.2 206.5 247.1 310.4 360.7 L3 (mm) 84.3 104.4 134.9 162.8 203.7 23 3.4 H1 (mm) 41.1 50 66.8 80.3 100.3 117.6 H2 (mm) 65 73.2 94.5 125.2 146.1 177.3 H3 (mm) 76.7 95.8 124 151.6 186.7 215.9 H4 (mm) 108.9 126.2 164.1 195.8 229.6 263.1 W (mm) 38.1 87.6 114.1 136.9 170.9 198.6 R1 (mm) 21.1 26.4 33.3 41.4 51.6 58.9 It is the square drive model used with heavy air sockets and adapters specially produced by INDUSTRIAL BOLTING TECHNOLOGIES (IBT) company, which is only a hydraulic torque wrench manufacturer and has its production site in America. It is also known as a hydraulic wrench. MAXDRV Series Socket Type Hydraulic Torque Wrench; oil and natural gas pipelines flange assembly and maintenance, wind power plants, hydroelectric and thermal power plants, iron and steel and cement factories, flange, large valve installation and maintenance of water and sewerage administrations, refineries, machinery, chemical and defense industry, mines and shipyards, tower cranes It has been specially produced for tightening and removing all kinds of nuts and bolts in all areas of heavy industry where electric torque wrenches, battery and air torque wrenches cannot fit, the working area is limited and high torque power is not enough. The IBT-manufactured TorsionX Square Drive Socket Hydraulic Torque Wrench Body has a compact design made of aluminum and high-strength steel alloy to minimize weight and increase durability. It consists of 6 different models with .7MD, 1MD, 3MD, 5MD, 10MD, 17MD codes between 86 Nm and 25,000 Nm capacities. MaxDrv (MD) Series Socket Type Hydraulic Torque Wrench works with a maximum continuous working pressure of 700 Bar. Continuously repeatable torque accuracy is ±3%. MD series socket type hydraulic torque wrench, designed considering difficult working conditions, can be used easily even in the most difficult places with its 360° x 180° multi-position rotatable oil inlet block, easy joining couplings and light structure. For the convenience of the user, a laser engraved pressure/torque table is engraved on the high power resistant body. IBT production MaxDrv (MD) Series Socket Type Hydraulic Torque Wrench with optional fully automatic pump suitable for continuous operation at maximum working pressure or with 700 bar twin hoses that can be included in the set, 5 meters in standard, but connected to Torsionx hydraulic torque pump, thanks to easy couplings. is working. You can easily adjust the torque value from the pressure regulating valve on the hydraulic torque pump by determining the value to be squeezed from the pressure gauge on the hydraulic torque pump, which can be read as Bar/Psi, and the Nm/bar table on the device. IBT production TorsionX model MaxDrv (MD) Series Socket Type Hydraulic Torque Wrench's Extra Durable steel support leg can be rotated 360 degrees and when it reaches the desired position, it is locked with the lock latch, allowing it to be loosened and fixed during the process. Optimum solutions are also offered with different model support leg options for places that cannot be solved with very special and standard support legs. The tightening and unscrewing direction of the MD series hydraulic socket wrench can be easily changed with a single push of the ratchet square driver on the device. In addition, there is an anti-jamming and anti-torsion latch on the device. MaxDrv (MD) Series Socket Type Hydraulic Torque Wrenches are suitable for working with all heavy duty pneumatic sockets and adapters in 3/4”, 1”, 1 ½”, 2 ½” sizes with square drivers varying according to the model called drive mechanism. Thanks to its durable body, hydraulic torque pump suitable for heating and long-term use, hydraulic twin hose with 700 bar operation and 2800 bar burst pressure, locking or screw connection couplings resistant to high pressure up to 1100 bar, it has made working very safe and international work safety. A set that meets the standards of s