BEND MAIN ROOF DRAIN JOINT

Bending Main Roof Drainage Joint ATECO Drainage Systems offer proven technology, maintenance-free, easy-to-install floating roof drains. All you have to do is fill out the standard ATECO Tank Drain Data Sheet and fax it to us and we will provide installation drawings for you. The ATECO Drain System is easy to install in any tank. Each drain line requires only a 500mm wide aisle to run between the sump and shell nozzles. For tanks over 60m in diameter, it is recommended to be used for more than one discharge for safety reasons. This can easily be done with the ATECO Drainage System. A large crude oil storage tank was previously fitted with 5 lines. Key Benefits Ateco Drain advantages in rotary joints: Traditional Swivel joint drains will eventually leak and require periodic maintenance. Tank cleaning costs are very expensive. ATECO Drain connections do not require maintenance for more than 15 years. Only 4 ATECO Drain connections/lines are required. This makes the ATECO Drain cheaper, simpler, lighter and easier to install. Ateco Drain has an advantage over hose drains: All types of drain hoses have issues where they interfere with floating roof landing legs from time to time. This causes premature unloading failure. Discharge hoses can have problems with their buoyancy, they must be too heavy to handle their own displaced weight. ATECO Drainswill always stays in the same narrow working aisle and will never interfere with the landing legs due to the fixed geometry of the ATECO Drain system.