TÜRKİYE / İSTANBUL
Surface cleaning of parts that are too large to fit in the automatic machine, removal of rust and surface roughening for paint Thanks to the Sandblasting - Painting line, metal sheets from 1500mm to 3000mm wide and profiles up to 500mm high are sandblasted in SA2.5 quality with an adjustable speed between 1 - 2.5m/min. and it is painted with shop-primer paint that protects against corrosion. Units that make up the Sandblasting - Painting line: Loading and unloading cross conveyors required for loading/unloading without waiting for the facility, individually adapted roller conveyors, Pre-Drying unit that dries wet and even snow-covered parts stored outside before sanding, roller conveyor type sandblasting machine and dry - cartridge type filter unit, painting cabin including upper and lower painting robots and water type filter unit, slat conveyor that carries the wet paint by protecting it until it dries, drying unit that dries the paint so that the parts coming to the output conveyor can be transferred to the next process immediately. In order to reduce energy costs, the waste heat energy of the pre-drying unit is used in the paint drying unit.
Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.
