SINGLE STOREY HOUSING

It is mounted on a pre-prepared concrete base with steel bolts. H profiles are also used in interior partition joints. In the plans prepared in such a way that the widths and lengths are multiples of 125.5 mm, there are 3 different walls: solid wall panel not exceeding 90 kg weight, wall panel with window and wall panel with door, standard wall thickness (8+44+8mm=60 mm). is happening. CARRIER SYSTEMS; The frame system, which is an earthquake resistant system, is preferred in buildings that contain all the features of the lightweight prefabricated technique. It is produced based on 100 kg/m2 snow load and 90 km/h wind speed, 1st degree earthquake conditions and 3 climate zones. Standard parts, steel column and truss and 40x60x1.5 mm profile purlins are used. All connections are made with steel bolts and nuts and are primed against corrosion. EXTERIOR WALLS; Insulated against heat and sound on the outer surface, non-flammable, not affected by humidity and water, 8 mm thick, 1250x2500 mm in size, ~1300kg/m3 density, B1 DIN4102 Part1 (non-flammable), thermal conductivity coefficient (^10'Cdry):0.15W/Mk , cemented particle board (BETOPAN). Insulated against heat and sound on its inner surface, non-flammable, unaffected by moisture and water, 8 mm thick, 1250x2500 mm in size, ~1300kg/m3 density, B1 DIN4102 Part1 (non-flammable), thermal conductivity coefficient (^10'Cdry):0.15W/Mk , cemented particle board (BETOPAN)