SINGLE STOREY STEEL VILLA HOUSING

It is mounted on a pre-prepared concrete base with steel bolts. CARRIER SYSTEMS; The frame system, which is an earthquake resistant system, is preferred in buildings that contain all the features of the lightweight prefabricated technique. It is resistant to 100 kg/m2 snow load and 45 kg/m2 wind load. All connections are made with steel bolts and nuts. It is designed from elements bent from galvanized sheets. Building H height is 250 cm. INTERNAL AND EXTERNAL WALLS; Special bent (C, U) profile carcass made of galvanized sheets with a thickness of 1.2 mm is used as the steel component of the building. As the exterior cladding of the building, 11 mm thick OSB is coated on the special bent profile carcass, a moisture bar on the OSB, and vinyl siding American Siding is covered on the humidity bar. Siding color is chosen by the customer. White gypsum board with a thickness of 12.5 mm is used on the interior surfaces of the building, and green gypsum board with a thickness of 12.5 mm is used on the interior surfaces of the wet floors. The wall thicknesses are 11 or 13 cm on the exterior according to the width of the special twist profile carcass. 12.5 mm thick white gypsum board is used on both surfaces of the walls in the interior partitions. The inner wall thicknesses vary according to the width of the special twist profile carcass. 8 cm rock wool is used for thermal insulation between OSB and profile carcass on interior and exterior walls. MEZZANINE; It is designed from specially bent profiles cut from galvanized sheets in two-storey structures. Betopan with a thickness of 16 mm is used as a coating on the intermediate layer. On the Betopan, the following floor coverings are made. ROOF COVERING; Roof; It has a light steel truss system and the roof purlins consist of 40x60x1.5 mm profiles. Building truss height and eave dimensions are determined according to the project and climate zones. Profile is designed as 11 mm thick OSB on purlin, 3 mm thick waterproofing membrane as roof sealing material over OSB, and Shingle as roof covering over membrane. Shingle color is red or green. For roof insulation, 80 mm glass wool is laid. PVC Vinyl is used as the eaves underlay material. Rain gutters and landings are made of PVC. CEILING COVERING; Ceiling; It is a suspended ceiling and 12.5 mm thick white gypsum board is used as ceiling covering. As thermal insulation, gypsum board is covered with DIN4102 and TS EN 13501-1, fireproof Class A roll glass wool with a thickness of 100 mm and a density of 14 kg/m3. The heat transmission coefficient is k=0.32 kcal/m2°Ch or 0.37 W/m²K. ELECTRICAL INSTALLATION; The electrical installation is drawn by us and a globe lamp is used for lighting. Sockets and switches are placed in appropriate places. All installation cables are antigron cables and are laid through the wall. (Lamp cables are 2x1.5 mm thick, socket cables are 3x2.5 mm thick.) Grounding system is available, grounding rod is taken by the customer and assembled by us. A fuse box is placed by attaching fuses. The supply of the electricity meter and the electricity subscription belong to the customer. All electrical materials are TSE certified and guaranteed. SANITARY INSTALLATION; Plumbing is taken by us. Bathrooms are equipped with a 80x80 cm shower tray, a pedestal sink, a toilet bowl, a bathroom strainer, a shower mixer and a sink armature. One sink, one toilet bowl or Turkish style toilet stone and faucet mixers are placed in WCs. All plumbing pipes are laid through the wall. All plumbing materials are TSE certified and guaranteed. DOORS; Exterior doors: Steel door with metal frame, door handle and mortise locks are fitted. Interior doors: American panel door with metal door frame, 820x1950 mm in size, is used, metal door handles and mortise locks are installed. WINDOWS; PVC joinery is double glazed, with a glass thickness of 4+10.5+4 mm, and the glasses are fitted and EGEPEN brand is used. If requested as an extra (it is priced separately); Window joinery is made in colour, Mosquito nets are attached to the opening wings of the windows, Wrought iron railings of the windows and balconies are made. FLOOR COVERINGS; Rooms and living room are covered with laminate flooring, wet floors (kitchen, corridor, veranda, bathroom and WC) are covered with ceramics. In the kitchen; Between the kitchen counter and the kitchen upper cabinet, tiles are made according to the length of the kitchen cabinet. WC and bathroom walls are tiled up to the ceiling. PAINT; Satin plaster is applied on the joint tape and painted with double layer plastic paint on the plaster.