SECURITY BUTTONS

TECHNICAL SPECIFICATIONS OF BETOPAN/TASONIT OR YALIPAN SECURITY BUTTONS WITH INJECTIONS The base frame is made of special bending of 3 mm thick sheet metal, and 40 x 60 – 2 mm thick box profile is used as the grid on the chassis. INTERNAL AND EXTERNAL WALLS; Specially bent (C, U ) profile carcass made of galvanized sheets is used as a steel component. 12 mm thick Betopan, Taşonit or Yalıpan joint gaps are used as exterior cladding. 8 mm thick PVC paneling, 8 mm thick Betopan or 12.5 mm Gypsum Board are used as interior wall covering. 8 cm rock wool is used for thermal insulation on interior and exterior walls. ROOF COVERING; In the roof part, shingle or trapezoidal sheet coating is made. Water downloads are given below in secret. 8mm PVC paneling is used as ceiling covering and 10 cm Izocam is made for insulation purposes. BASE; Betopan with a thickness of 16 mm is used on the grid as the floor covering. Betopan is designed as 3 mm thick PVC on top. DOORS; Exterior doors: The main entrance door is 90x200 cm in size, made of 1.2 galvanized + painted sheet metal with press bending (metal), and glass wool or (PVC Door) is used as thermal insulation between the doors. Door handles and locks are attached. Interior doors: 80x195 cm sized American panel door. Door handles and locks are attached. WINDOWS; PVC joinery is double glazed with double glass, glass thickness is 4+10.5+4 mm, glasses are fitted and PAKPEN brand is used. If requested as an extra; window joinery is made in color and mosquito nets are attached to the opening wings of the windows. (In WCs, culverts are placed instead of windows.) ELECTRICAL INSTALLATION; The electrical installation is drawn by us and a globe lamp is used for lighting. An outdoor lighting lamp is installed. Sockets and switches are placed in appropriate places. All installation cables are antigron cables and are laid through the wall. (Lamp cables are 2x1.5 mm thick, socket cables are 3x2.5 mm thick.) Grounding system is available, grounding rod is taken by the customer and assembled by us. A fuse box is placed by attaching fuses. The supply of the electricity meter and the electricity subscription belong to the customer. All electrical materials are TSE certified and guaranteed. SANITARY INSTALLATION; Plumbing is drawn, bathroom and toilet faucets are installed and Turkish stone or European stone is placed in the toilet. All plumbing pipes are laid on the surface. All plumbing materials are TSE certified and guaranteed. ***There are crane lifting connections at all four corners of the container.*** TECHNICAL SPECIFICATIONS OF AMERICAN SIDING SECURITY BOOTS The base frame is made of 3 mm thick sheet metal, and 40 x 60 – 2 mm thick box profile is used as the grid on the chassis. INTERNAL AND EXTERNAL WALLS; Special bent (C, U) profile carcass made of galvanized sheets with a thickness of 1.2 mm is used as the steel component of the building. As the exterior cladding of the building, 11 mm thick OSB is coated on the special bent profile carcass, a moisture bar on the OSB, and vinyl siding American Siding is covered on the humidity bar. Siding color is chosen by the customer. 8 mm thick PVC wainscot, 8 mm thick Betopan or 12.5 mm gypsum board are used as interior wall covering. 8 cm rock wool is used for thermal insulation between OSB and profile carcass on interior and exterior walls. The wall thickness is 13 cm on the exterior facades. ROOF COVERING; Roof; It has a light steel truss system and the roof purlins consist of 40x60x1.5 mm profiles. Building truss height and eave dimensions are determined according to the project. Profile is designed as 11 mm thick OSB on purlin, 3 mm thick waterproofing membrane as roof sealing material over OSB, and Shingle as roof covering over membrane. Shingle color is red or green. For roof insulation, 80 mm glass wool is laid. PVC Vinyl is used as the eaves underlay material. Rain gutters and landings are made of PVC. BASE; Betopan with a thickness of 16 mm is used on the grid as the floor covering. Betopan is designed as 3 mm thick PVC on top. DOORS; Exterior doors: The main entrance door is 90x200 cm in size, made of 1.2 galvanized + painted sheet metal with press bending (metal), and glass wool or (PVC Door) is used as thermal insulation between the doors. Door handles and locks are attached. Interior doors: 80x195 cm sized American panel door. Door handles and locks are attached. WINDOWS; PVC joinery is double glazed with double glass, glass thickness is 4+10.5+4 mm, glasses are fitted and PAKPEN brand is used. If requested as an extra; window joinery is made in color and mosquito nets are attached to the opening wings of the windows. (In WCs, culverts are placed instead of windows.) ELECTRICAL INSTALLATION; electrical installation