TÜRKİYE / ANKARA
TECHNICAL SPECIFICATIONS OF BETOPAN/TASONIT OR YALIPAN SECURITY BUTTONS WITH INJECTIONS The base frame is made of special bending of 3 mm thick sheet metal, and 40 x 60 – 2 mm thick box profile is used as the grid on the chassis. INTERNAL AND EXTERNAL WALLS; Specially bent (C, U ) profile carcass made of galvanized sheets is used as a steel component. 12 mm thick Betopan, Taşonit or Yalıpan joint gaps are used as exterior cladding. 8 mm thick PVC paneling, 8 mm thick Betopan or 12.5 mm Gypsum Board are used as interior wall covering. 8 cm rock wool is used for thermal insulation on interior and exterior walls. ROOF COVERING; In the roof part, shingle or trapezoidal sheet coating is made. Water downloads are given below in secret. 8mm PVC paneling is used as ceiling covering and 10 cm Izocam is made for insulation purposes. BASE; Betopan with a thickness of 16 mm is used on the grid as the floor covering. Betopan is designed as 3 mm thick PVC on top. DOORS; Exterior doors: The main entrance door is 90x200 cm in size, made of 1.2 galvanized + painted sheet metal with press bending (metal), and glass wool or (PVC Door) is used as thermal insulation between the doors. Door handles and locks are attached. Interior doors: 80x195 cm sized American panel door. Door handles and locks are attached. WINDOWS; PVC
Warning: It is recommended that you do not make any payment (deposit, advance, etc.) before visiting the actual area (workplace, shop, etc.) where the advertiser offers his goods and services to the relevant parties and before receiving the goods and services you want to buy.
